The versatility of Pneumatic high stress grouting pumps

เครื่องวัดแรงดันเกจที่นิยมใช้ is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes to be able to reinforce the unfastened rock mass. The most grain dimension cannot exceed zero.2 mm.
Grouting pump operation and maintenance is simple, protected and dependable. This pump is used in mines working underneath difficult conditions as a result of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base frame and stand, strain gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it actually works
Pneumatic stress within the air cylinder exerts a excessive stress on the grout combination which leads to ejection of grout with a excessive strain and velocity. The valves of the air cylinder within the pump operate automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be driven even with out Electrical power provide in remote areas by utilizing engine pushed compressor.
The pump is majorly used in building and mining industry for injecting materials into extensive and medium size hole in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up etc. In mining business it is used to fill up cement resolution where there is a gap exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward upkeep and transportation. Challenging works like Grouting in Bridges.
เกจวัดแรงดันnuovafima : How hydraulic submersible pumps work
This pump is extensively utilized in tunnels, coal mine, bridges and dams, constructing basis, and other underground projects, and inflammable, explosive sites and other bad setting.
It has utility in chemical trade also to pump out chemical slurries.
The pump is electricity free so, can be utilized at any site condition whether it is rural or urban.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment vary. Generally the ultimate amount of the grouting volume is eight or10 instances of the quantity to start with. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and flow may be adjusted according to the necessities of grouting,(The move of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electricity, development, mining etc. ground/underground building.
Mining Pneumatic Grouting pump has the advantages of low vitality consumption, small vibration, low noise, small measurement, high effectivity, reliable efficiency, pressure and move control, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump is also Light weight and with a wheelie design it could be carried simply. It is designed for simple operation and low maintenance. Last but not least its spare parts are simply available.

Scroll to Top